Flange Insulation Gasket Kit can help solve most flange sealing and insulation problems

　　Shaoxing Xinjia Sealing Products Co., Ltd. provides high-quality products that can help solve most flange sealing and insulation problems. Our insulation kits are usually used in offshore installations, seawater environments, chemical installations, and pipelines in oil refineries. These flanges need to be properly flanged to prevent leakage and must also be insulated as a whole. Our insulation kit complies with ANSI 16.5 and API 605 standards, other standards need to provide more specifications according to our requirements.

　　Kammprofile Gaskets Suppliers' insulating gaskets can be designated as "E" and "F" types, and single, double or one-piece sleeves and gaskets can be used as options for different electrical insulation between flanges. In addition, there are a variety of material options for insulating gaskets, sleeves, and gaskets.

　　The Flange Insulation Gasket Kit is used to prevent the loss of protection current and the loss of unprotected metal pipes and equipment (such as steam generators). We use flange insulation kits at the entrance and exit of pumping stations and oil depots to prevent cathodic protection current from flowing into the main trunk. The Flange Insulation Gasket Kit can also be used to connect underground and different numbers of stray current lines (different materials, new and old pipes, etc.) as an anti-corrosion measure.

　　Where do I need the Flange Insulation Gasket Kit?

　　Import and export of stations at the beginning and end of the protected pipeline.

　　The entrance and exit of the site in the middle of the protected pipeline. However, in order to ensure the continuity of the heat conduction pipes on both sides of the station, the pipes outside the flange should be connected by cables.

　　A hypothetical pipeline passing the protected current at both ends of the pipeline

　　The connection of the protected pipeline should not be cathodic protected

　　Stray current interference area

　　Dissimilar metals, new and old pipe connections; bare and coated pipe connections.

　　Use electrical grounding for positioning