Nitrile coated G10 isolating gaskets are coated with a nominal 0.063"nitrile coating on each side of the G10 core from the ID to the OD of the gasket. The total gasket thickness is a nominal 0.1877. All contact areas of the gasket are effectively a sealing point. The gasket requires more load to seal than a Senja or Senja-X gasket, but will perform well where pitted flanges, warped flanges or non-parallel fianges (such as non-metallic flanges with molded.concentric convex rings) exist

FEATURES
Great for non-potable water applications
·Great for non-metallic flange